Hp-velotechnik Spirit User Manual download pdf (Page 50)

Velotechnik

The seat

The seat cover of the back rest stretches un-

der load. On the backside, there are four belts

to tighten the back rest again.Try different ten-

sions; often, a somewhat lower tension appears

to be more comfortable.

Clean the back rest with lukewarm water and

a sponge. Do not put it in the washing machi-

ne, since the net material with the reflective

strip will be damaged.

The seat cushion suffers from wear and tear. It

can be damaged by sharp items or by chemical

cleansing agents.When the surface is worn or

damaged you will have to replace the cushion.

Otherwise, dampness could get into the seat

and affect the wooden underside, which would

endanger its solidity.

If you dismount the quick releases of the seat

fastening, take care to remount the transpa-

rent plastic bushings between the sliders when

you put them back.These bushings work as

compression springs that push the sliders away

from the clamping rail after you have opened

the quick releases. Only that way can the seat

be smoothly moved on the rail.

At the front quick release there are on both

sides knurled washers between the quick

release and the aluminum fittings.These was-

hers provide the clamping force necessary for

the adjustment of the angle of the back rest.

The knurling might affect the coating in the

clamping area slightly but it does not interfere

with the functionality.

The seat

Clean the back rest and the zipper with lukewarm water.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 71 72

No comments

Hp-velotechnik Spirit User Manual Page 50